Flooring is one of the most important thing you might want to consider if ever you will be renovating a room or the entire home itself. Engineered wood flooring is the best option for easier installation than placing wood flooring material on a bare floor. Read on to know more on how you can replace your tiles with hardwood floors easily.
To start with, you need to decide whether you would like to go with a floating floor or with a glue down floor. A floating floor does not require either gluing the floor or nailing down the floor. It’s probably the easiest method to install hardwood floors on tiles. A glue down floor, based on the name itself, requires that the hardwood be glued on to the tiles. This kind of installation requires you to do additional preparation on the tile surface itself, so you need to be sure about your decision.
Afterwards, you begin making preparations either for floating floor or glue down floor. Begin the process by sweeping and mopping the tiles. Afterwards, you need to make sure that there are no cracks or holes on the floor so fill it in with some patching compound. Then you need to be certain that the surface is smooth and leveled, so use a sander or grinder for that one. You then need to vacuum the entire place to remove the dust and debris left behind by sanding.
It is important that you also fill out the bottom of door casings, so you need to install new flooring there as well. And just follow the installation procedure, and start applying hardwood floor adhesive on the entire surface where you will be installing your hardwood. When doing floating flooring, just go ahead and follow the instructions usually listed down for hardwood engineered products. For glue down flooring, you do this by applying hardwood adhesive from one corner of the room until you fill the entire room.
And lastly, after the floor adhesive has completely dried, you need to install the new hardwood flooring materials. The installation is achieved by installing the hardwood floors one plank at a time. Sometimes you may need to cut out some planks, so just go ahead and dot it. Fill in until the entire surface has successfully placed with new floor.
Those are the steps on how to change or install engineered hardwood floors. It is better to install engineered hardwood floors if ever you will be renovating or replacing your floors so that it will truly enhance the beauty of your home.
So take advantage of improving your home’s value with hardwood with our hardwood flooring San Diego. Where our installers are experienced pros at our San Diego hardwood installation.